The Vehicle CAN Library features pre-defined CAN signal mappings for a wide range of popular vehicles. It is integrated into both SoloStorm and CircuitStorm and can be accessed through the Vehicle Telemetry settings. In CircuitStorm, access to the library is limited to customers with an active subscription.
Supported Hardware
The library becomes available once a supported CAN bus device is selected. Currently supported devices include:
- OBDLink CAN Bus Scan Tool (LX/MX/MX+)
Software Configuration
To apply a configuration, navigate to the in-app Vehicle CAN Library, open the Vehicle Telemetry settings, locate your vehicle in the list, and select it. If your vehicle’s factory OBD connector does not provide the required CAN bus, you can install our CAN Tap Harness to add a second OBD connector for device connectivity.
Request a New Mapping
The following list is based on app build 723. We are constantly working to add mappings for popular vehicles. If we don’t have a mapping for your vehicle, please contact us. Let us know the make, model, and year of your vehicle, and we will evaluate adding it to our backlog.
Alfa Romeo
4C (Type 960) 2013–2014▾
Channels
Supported Devices
ConnectionThe CAN network is available via the factory OBD-II connector, using the standard pins of CAN High on pin 6 and CAN Low on pin 14. |
Audi
TT (8J) 2006–2014▾
Channels
Supported Devices
ConnectionThe PT CAN network is unavailable from the OBD port, but can be tapped from the vehicle harness. This is best done from the connector at the CAN Gateway. HarnessPetrel Data CAN Tap Harness Speed500 kbit/s TerminationDo not terminate WiringWhen working with vehicle wiring, it is crucial to verify all wire colors and pin locations using manufacturer-provided information. You are solely responsible for correctly modifying your vehicle's wiring if necessary. Petrel Data Systems assumes no responsibility for any modifications you make. While any wiring information provided has been verified to the best of our knowledge, you must independently confirm its accuracy. The CANH and CANL wires are bundled as a twisted pair.
|
||||||||||||||||
TT (8S) 2015–2023▾
Channels
Supported Devices
ConnectionThe PT CAN network is unavailable from the OBD port, but can be tapped from the vehicle harness. This is best done from the connector junction located behind the left side kick panel. HarnessPetrel Data CAN Tap Harness Speed500 kbit/s TerminationDo not terminate WiringWhen working with vehicle wiring, it is crucial to verify all wire colors and pin locations using manufacturer-provided information. You are solely responsible for correctly modifying your vehicle's wiring if necessary. Petrel Data Systems assumes no responsibility for any modifications you make. While any wiring information provided has been verified to the best of our knowledge, you must independently confirm its accuracy. The CANH and CANL wires are bundled as a twisted pair.
|
BMW
1 Series (E82) 2004–2013▾
Channels
Supported Devices
ConnectionThe PT CAN network is unavailable from the factory OBD-II connector, but can be tapped from the vehicle harness. The CAN wiring pair can be found above and behind the drivers side kick panel, behind the passenger side kick panel around the FEM, and behind the rear seat bolsters around the fuel pump controller. Power and ground wire color are provided for the fuel pump controller. They can also be tapped from wiring in any of these areas, but you must confirm pins and colors using factory documentation. HarnessPetrel Data CAN Tap Harness Speed500 kbit/s TerminationDo not terminate WiringWhen working with vehicle wiring, it is crucial to verify all wire colors and pin locations using manufacturer-provided information. You are solely responsible for correctly modifying your vehicle's wiring if necessary. Petrel Data Systems assumes no responsibility for any modifications you make. While any wiring information provided has been verified to the best of our knowledge, you must independently confirm its accuracy. The CANH and CANL wires are bundled as a twisted pair.
|
||||||||||||||||
1M (E82) 2011–2012▾
Channels
Supported Devices
ConnectionThe PT CAN network is unavailable from the factory OBD-II connector, but can be tapped from the vehicle harness. The CAN wiring pair can be found above and behind the drivers side kick panel, behind the passenger side kick panel around the FEM, and behind the rear seat bolsters around the fuel pump controller. Power and ground wire color are provided for the fuel pump controller. They can also be tapped from wiring in any of these areas, but you must confirm pins and colors using factory documentation. HarnessPetrel Data CAN Tap Harness Speed500 kbit/s TerminationDo not terminate WiringWhen working with vehicle wiring, it is crucial to verify all wire colors and pin locations using manufacturer-provided information. You are solely responsible for correctly modifying your vehicle's wiring if necessary. Petrel Data Systems assumes no responsibility for any modifications you make. While any wiring information provided has been verified to the best of our knowledge, you must independently confirm its accuracy. The CANH and CANL wires are bundled as a twisted pair.
|
||||||||||||||||
2 Series (F22) 2014–2021▾
Channels
Supported Devices
ConnectionThe PT CAN network is unavailable from the factory OBD-II connector, but can be tapped from the vehicle harness. The CAN wiring pair can be found above and behind the drivers side kick panel, behind the passenger side kick panel around the FEM, and behind the rear seat bolsters around the fuel pump controller. Power and ground wire color are provided for the fuel pump controller. They can also be tapped from wiring in any of these areas, but you must confirm pins and colors using factory documentation. HarnessPetrel Data CAN Tap Harness Speed500 kbit/s TerminationDo not terminate WiringWhen working with vehicle wiring, it is crucial to verify all wire colors and pin locations using manufacturer-provided information. You are solely responsible for correctly modifying your vehicle's wiring if necessary. Petrel Data Systems assumes no responsibility for any modifications you make. While any wiring information provided has been verified to the best of our knowledge, you must independently confirm its accuracy. The CANH and CANL wires are bundled as a twisted pair.
|
||||||||||||||||
3 Series (E46) 1998–2005▾
Channels
Supported Devices
ConnectionThe PT CAN network is unavailable from the factory OBD-II connector, but can be tapped from the vehicle harness. The CAN wiring pair can be found behind the kombi/instrument cluster and in other wiring looms around the front of the passenger compartment. HarnessPetrel Data CAN Tap Harness Speed500 kbit/s TerminationDo not terminate WiringWhen working with vehicle wiring, it is crucial to verify all wire colors and pin locations using manufacturer-provided information. You are solely responsible for correctly modifying your vehicle's wiring if necessary. Petrel Data Systems assumes no responsibility for any modifications you make. While any wiring information provided has been verified to the best of our knowledge, you must independently confirm its accuracy. The CANH and CANL wires are bundled as a twisted pair.
|
||||||||||||||||
3 Series (E90 E92) 2005–2013▾
Channels
Supported Devices
ConnectionThe PT CAN network is unavailable from the factory OBD-II connector, but can be tapped from the vehicle harness. The CAN wiring pair can be found behind the glove box or behind the kombi/instrument cluster. Power and ground wires can also be tapped from wiring in any of these areas, but you must confirm pins and colors using factory documentation. HarnessPetrel Data CAN Tap Harness Speed500 kbit/s TerminationDo not terminate WiringWhen working with vehicle wiring, it is crucial to verify all wire colors and pin locations using manufacturer-provided information. You are solely responsible for correctly modifying your vehicle's wiring if necessary. Petrel Data Systems assumes no responsibility for any modifications you make. While any wiring information provided has been verified to the best of our knowledge, you must independently confirm its accuracy. The CANH and CANL wires are bundled as a twisted pair.
|
||||||||||||||||
3 Series (F30) 2012–2019▾
Channels
Supported Devices
ConnectionThe PT CAN network is unavailable from the factory OBD-II connector, but can be tapped from the vehicle harness. The CAN wiring pair can be found above and behind the drivers side kick panel, behind the passenger side kick panel around the FEM, and behind the rear seat bolsters around the fuel pump controller. Power and ground wire color are provided for the fuel pump controller. They can also be tapped from wiring in any of these areas, but you must confirm pins and colors using factory documentation. HarnessPetrel Data CAN Tap Harness Speed500 kbit/s TerminationDo not terminate WiringWhen working with vehicle wiring, it is crucial to verify all wire colors and pin locations using manufacturer-provided information. You are solely responsible for correctly modifying your vehicle's wiring if necessary. Petrel Data Systems assumes no responsibility for any modifications you make. While any wiring information provided has been verified to the best of our knowledge, you must independently confirm its accuracy. The CANH and CANL wires are bundled as a twisted pair.
|
||||||||||||||||
4 Series (F32) 2013–2020▾
Channels
Supported Devices
ConnectionThe PT CAN network is unavailable from the factory OBD-II connector, but can be tapped from the vehicle harness. The CAN wiring pair can be found above and behind the drivers side kick panel, behind the passenger side kick panel around the FEM, and behind the rear seat bolsters around the fuel pump controller. Power and ground wire color are provided for the fuel pump controller. They can also be tapped from wiring in any of these areas, but you must confirm pins and colors using factory documentation. HarnessPetrel Data CAN Tap Harness Speed500 kbit/s TerminationDo not terminate WiringWhen working with vehicle wiring, it is crucial to verify all wire colors and pin locations using manufacturer-provided information. You are solely responsible for correctly modifying your vehicle's wiring if necessary. Petrel Data Systems assumes no responsibility for any modifications you make. While any wiring information provided has been verified to the best of our knowledge, you must independently confirm its accuracy. The CANH and CANL wires are bundled as a twisted pair.
|
||||||||||||||||
M2 (F87) 2016–2021▾
Channels
Supported Devices
ConnectionThe PT CAN network is unavailable from the factory OBD-II connector, but can be tapped from the vehicle harness. The CAN wiring pair can be found above and behind the drivers side kick panel, behind the passenger side kick panel around the FEM, behind the kombi/instrument cluster, and behind the rear seat bolsters around the fuel pump controller. Power and ground wires can also be tapped from wiring in any of these areas, but you must confirm pins and colors using factory documentation. HarnessPetrel Data CAN Tap Harness Speed500 kbit/s TerminationDo not terminate WiringWhen working with vehicle wiring, it is crucial to verify all wire colors and pin locations using manufacturer-provided information. You are solely responsible for correctly modifying your vehicle's wiring if necessary. Petrel Data Systems assumes no responsibility for any modifications you make. While any wiring information provided has been verified to the best of our knowledge, you must independently confirm its accuracy. The CANH and CANL wires are bundled as a twisted pair.
|
||||||||||||||||
M3 (E90 E92) 2007–2013▾
Channels
Supported Devices
ConnectionThe PT CAN network is unavailable from the factory OBD-II connector, but can be tapped from the vehicle harness. The CAN wiring pair can be found behind the glove box or behind the kombi/instrument cluster. Power and ground wires can also be tapped from wiring in any of these areas, but you must confirm pins and colors using factory documentation. HarnessPetrel Data CAN Tap Harness Speed500 kbit/s TerminationDo not terminate WiringWhen working with vehicle wiring, it is crucial to verify all wire colors and pin locations using manufacturer-provided information. You are solely responsible for correctly modifying your vehicle's wiring if necessary. Petrel Data Systems assumes no responsibility for any modifications you make. While any wiring information provided has been verified to the best of our knowledge, you must independently confirm its accuracy. The CANH and CANL wires are bundled as a twisted pair.
|
||||||||||||||||
M3 (F80) 2014–2018▾
Channels
Supported Devices
ConnectionThe PT CAN network is unavailable from the factory OBD-II connector, but can be tapped from the vehicle harness. The CAN wiring pair can be found above and behind the drivers side kick panel, behind the passenger side kick panel around the FEM, and behind the rear seat bolsters around the fuel pump controller. Power and ground wire color are provided for the fuel pump controller. They can also be tapped from wiring in any of these areas, but you must confirm pins and colors using factory documentation. HarnessPetrel Data CAN Tap Harness Speed500 kbit/s TerminationDo not terminate WiringWhen working with vehicle wiring, it is crucial to verify all wire colors and pin locations using manufacturer-provided information. You are solely responsible for correctly modifying your vehicle's wiring if necessary. Petrel Data Systems assumes no responsibility for any modifications you make. While any wiring information provided has been verified to the best of our knowledge, you must independently confirm its accuracy. The CANH and CANL wires are bundled as a twisted pair.
|
||||||||||||||||
M4 (F82) 2014–2020▾
Channels
Supported Devices
ConnectionThe PT CAN network is unavailable from the factory OBD-II connector, but can be tapped from the vehicle harness. The CAN wiring pair can be found above and behind the drivers side kick panel, behind the passenger side kick panel around the FEM, and behind the rear seat bolsters around the fuel pump controller. Power and ground wire color are provided for the fuel pump controller. They can also be tapped from wiring in any of these areas, but you must confirm pins and colors using factory documentation. HarnessPetrel Data CAN Tap Harness Speed500 kbit/s TerminationDo not terminate WiringWhen working with vehicle wiring, it is crucial to verify all wire colors and pin locations using manufacturer-provided information. You are solely responsible for correctly modifying your vehicle's wiring if necessary. Petrel Data Systems assumes no responsibility for any modifications you make. While any wiring information provided has been verified to the best of our knowledge, you must independently confirm its accuracy. The CANH and CANL wires are bundled as a twisted pair.
|
Chevrolet
Camaro (A1) 2016–2024▾
Channels
Supported Devices
ConnectionThe CAN network is available via the factory OBD-II connector, using the standard pins of CAN High on pin 6 and CAN Low on pin 14. |
||||||||
Corvette (C6) 2005–2013▾
Channels
Supported Devices
ConnectionThe CAN network is available via the factory OBD-II connector, using the standard pins of CAN High on pin 6 and CAN Low on pin 14. |
||||||||
Corvette (C7) 2014–2019▾
Channels
Supported Devices
ConnectionThe CAN network is available via the factory OBD-II connector, using the standard pins of CAN High on pin 6 and CAN Low on pin 14. |
||||||||
Corvette (C8) 2020+▾
Channels
Supported Devices
ConnectionThe CAN network is unavailable from the factory OBD-II connector, but can be tapped from the vehicle harness. Remove the driver's side foot well sill plate, and locate the necessary wires just below the factory OBD port. HarnessPetrel Data CAN Tap Harness Speed500 kbit/s TerminationDo not terminate WiringWhen working with vehicle wiring, it is crucial to verify all wire colors and pin locations using manufacturer-provided information. You are solely responsible for correctly modifying your vehicle's wiring if necessary. Petrel Data Systems assumes no responsibility for any modifications you make. While any wiring information provided has been verified to the best of our knowledge, you must independently confirm its accuracy. The CANH and CANL wires are bundled as a twisted pair.
|
Ford
Fiesta (B299) 2011–2019▾
Channels
Supported Devices
ConnectionThe CAN network is available via the factory OBD-II connector, using the standard pins of CAN High on pin 6 and CAN Low on pin 14. |
||||||||||||||||
Focus 2011–2018▾
Channels
Supported Devices
ConnectionThe CAN network is available via the factory OBD-II connector, using the standard pins of CAN High on pin 6 and CAN Low on pin 14. |
||||||||||||||||
Focus RS (C346) 2011–2018▾
Channels
Supported Devices
ConnectionThe CAN network is available via the factory OBD-II connector, using the standard pins of CAN High on pin 6 and CAN Low on pin 14. |
||||||||||||||||
Mustang (S197) 2005–2014▾
Channels
Supported Devices
ConnectionThe CAN network is available via the factory OBD-II connector, using the standard pins of CAN High on pin 6 and CAN Low on pin 14. |
||||||||||||||||
Mustang (S550) 2015–2018▾
Channels
Supported Devices
ConnectionThe CAN network is available via the factory OBD-II connector, using the standard pins of CAN High on pin 6 and CAN Low on pin 14. |
||||||||||||||||
Mustang (S550) 2019–2023▾
Channels
Supported Devices
ConnectionThe HS2 CAN network is unavailable from the factory OBD-II connector default pins, but can be tapped from the vehicle harness at the gateway module. The gateway module is integrated with the factory OBD-II connector, and can be more easily accessed by removing the 2 8mm nuts that retain it to the vehicle. Optionally, pins 3 (HS2 CANH) and 11 (HS2 CANL) can be used on the factory OBD port with a custom adapter cable, however our testing has shown these to not be enabled on all vehicles. HarnessPetrel Data CAN Tap Harness Speed500 kbit/s TerminationDo not terminate WiringWhen working with vehicle wiring, it is crucial to verify all wire colors and pin locations using manufacturer-provided information. You are solely responsible for correctly modifying your vehicle's wiring if necessary. Petrel Data Systems assumes no responsibility for any modifications you make. While any wiring information provided has been verified to the best of our knowledge, you must independently confirm its accuracy. The CANH and CANL wires are bundled as a twisted pair.
|
GJP
IO Box for GR86/BRZ 2022+▾
Channels
Supported Devices
ConnectionThe GJP IO Box injects CAN data directly into diagnostic CAN bus at the factory OBD-II connector, using the standard pins of CAN High on pin 6 and CAN Low on pin 14. The GJP IO Box must be running firmware version 3.0.3 or newer. HarnessFactory OBD-II Connector Speed500 kbit/s TerminationNot required |
Honda
Civic Type R (FK8) 2017–2019▾
Channels
Supported Devices
ConnectionThe CAN network is available via the factory OBD-II connector, using the standard pins of CAN High on pin 6 and CAN Low on pin 14. |
||||||||||||||||
Civic Type R (FL5) 2023+▾
Channels
Supported Devices
ConnectionThe required CAN data is unavailable from the factory OBD-II connector default pins, but can be tapped from the vehicle harness located under the driver's (left) side kick panel. There are a number of red/white CAN bus lines in a large bundle. This bundle contains the purple ignition power wire, however the necessary CAN bus is found inside a smaller bundle just behind it. This smaller bundle contains only a single red/white twisted pair, which is the targeted CAN bus. This bundle also contains non-twisted pair red and white wires. Do not confuse them for CAN bus lines. Ground to the chassis if no black wire is present. HarnessPetrel Data CAN Tap Harness Speed500 kbit/s TerminationDo not terminate WiringWhen working with vehicle wiring, it is crucial to verify all wire colors and pin locations using manufacturer-provided information. You are solely responsible for correctly modifying your vehicle's wiring if necessary. Petrel Data Systems assumes no responsibility for any modifications you make. While any wiring information provided has been verified to the best of our knowledge, you must independently confirm its accuracy. The CANH and CANL wires are bundled as a twisted pair.
|
||||||||||||||||
S2000 (AP2) 2006–2009▾
Channels
Supported Devices
ConnectionThe CAN network is available via the factory OBD-II connector, using the standard pins of CAN High on pin 6 and CAN Low on pin 14. |
Hyundai
Elantra N (CN7 N) 2021+▾
Channels
Supported Devices
ConnectionThe required CAN data is unavailable from the factory OBD-II connector default pins, but can be tapped from the vehicle harness located under the passenger (right) side kick panel at the A/C Control Module connectors. The P-CAN bus and chassis ground are available at connector M04-B, ignition power at connector M04-A. HarnessPetrel Data CAN Tap Harness Speed500 kbit/s TerminationDo not terminate WiringWhen working with vehicle wiring, it is crucial to verify all wire colors and pin locations using manufacturer-provided information. You are solely responsible for correctly modifying your vehicle's wiring if necessary. Petrel Data Systems assumes no responsibility for any modifications you make. While any wiring information provided has been verified to the best of our knowledge, you must independently confirm its accuracy. The CANH and CANL wires are bundled as a twisted pair.
|
Lotus
Evora (122) 2010–2021▾
Channels
Supported Devices
ConnectionThe CAN network is available via the factory OBD-II connector, using the standard pins of CAN High on pin 6 and CAN Low on pin 14. |
Mazda
2 (DE) 2007–2014▾
Channels
Supported Devices
ConnectionThe CAN network is available via the factory OBD-II connector, using the standard pins of CAN High on pin 6 and CAN Low on pin 14. |
MX-5 (NC) 2005–2015▾
Channels
Important NoteBrake, steering, and wheel speed channels are only available on models equipped with optional stability control. Supported Devices
ConnectionThe CAN network is available via the factory OBD-II connector, using the standard pins of CAN High on pin 6 and CAN Low on pin 14. |
MX-5 (ND) 2015–2023▾
Channels
Supported Devices
ConnectionThe CAN network is available via the factory OBD-II connector, using the standard pins of CAN High on pin 6 and CAN Low on pin 14. |
RX-8 (FE) 2003–2012▾
Channels
Supported Devices
ConnectionThe CAN network is available via the factory OBD-II connector, using the standard pins of CAN High on pin 6 and CAN Low on pin 14. |
MegaSquirt
MS2/MS3 ECU▾
Channels
Important NoteThe MegaSquirt MS2 and MS3 ECUs support 2 separate CAN bus protocols: Dash Broadcast, and Realtime Data Broadcast. This mapping supports the Realtime Data Broadcast. Supported Devices
ConnectionRefer to the user manual for your model of MegaSquirt ECU for information about the required CAN bus and power wiring. HarnessPetrel Data CAN Tap Harness Speed500 kbit/s TerminationDo not terminate |
Nissan
350Z (Z33) 2003–2009▾
Channels
Supported Devices
ConnectionThe CAN network is available via the factory OBD-II connector, using the standard pins of CAN High on pin 6 and CAN Low on pin 14. |
370Z (Z34) 2009–2020▾
Channels
Supported Devices
ConnectionThe CAN network is available via the factory OBD-II connector, using the standard pins of CAN High on pin 6 and CAN Low on pin 14. |
Porsche
718 (982) Boxster 2016+▾
Channels
Supported Devices
ConnectionThe CAN network is unavailable from the factory OBD-II connector, but can be tapped from the vehicle harness. This is best done at the CAN gateway box or around the driver's foot well, just above the fuse panel. HarnessPetrel Data CAN Tap Harness Speed500 kbit/s TerminationDo not terminate WiringWhen working with vehicle wiring, it is crucial to verify all wire colors and pin locations using manufacturer-provided information. You are solely responsible for correctly modifying your vehicle's wiring if necessary. Petrel Data Systems assumes no responsibility for any modifications you make. While any wiring information provided has been verified to the best of our knowledge, you must independently confirm its accuracy. The CANH and CANL wires are bundled as a twisted pair.
|
||||||||||||||||
718 (982) Cayman 2016+▾
Channels
Supported Devices
ConnectionThe CAN network is unavailable from the factory OBD-II connector, but can be tapped from the vehicle harness. This is best done at the CAN gateway box or around the driver's foot well, just above the fuse panel. HarnessPetrel Data CAN Tap Harness Speed500 kbit/s TerminationDo not terminate WiringWhen working with vehicle wiring, it is crucial to verify all wire colors and pin locations using manufacturer-provided information. You are solely responsible for correctly modifying your vehicle's wiring if necessary. Petrel Data Systems assumes no responsibility for any modifications you make. While any wiring information provided has been verified to the best of our knowledge, you must independently confirm its accuracy. The CANH and CANL wires are bundled as a twisted pair.
|
||||||||||||||||
718 (982) Cayman GT4 2019–2023▾
Channels
Supported Devices
ConnectionThe CAN network is unavailable from the factory OBD-II connector, but can be tapped from the vehicle harness. This is best done at the CAN gateway box or around the driver's foot well, just above the fuse panel. HarnessPetrel Data CAN Tap Harness Speed500 kbit/s TerminationDo not terminate WiringWhen working with vehicle wiring, it is crucial to verify all wire colors and pin locations using manufacturer-provided information. You are solely responsible for correctly modifying your vehicle's wiring if necessary. Petrel Data Systems assumes no responsibility for any modifications you make. While any wiring information provided has been verified to the best of our knowledge, you must independently confirm its accuracy. The CANH and CANL wires are bundled as a twisted pair.
|
||||||||||||||||
718 (982) Spyder 2019–2023▾
Channels
Supported Devices
ConnectionThe CAN network is unavailable from the factory OBD-II connector, but can be tapped from the vehicle harness. This is best done at the CAN gateway box or around the driver's foot well, just above the fuse panel. HarnessPetrel Data CAN Tap Harness Speed500 kbit/s TerminationDo not terminate WiringWhen working with vehicle wiring, it is crucial to verify all wire colors and pin locations using manufacturer-provided information. You are solely responsible for correctly modifying your vehicle's wiring if necessary. Petrel Data Systems assumes no responsibility for any modifications you make. While any wiring information provided has been verified to the best of our knowledge, you must independently confirm its accuracy. The CANH and CANL wires are bundled as a twisted pair.
|
||||||||||||||||
911 (991.1) 2012–2016▾
Channels
Supported Devices
ConnectionThe CAN network is unavailable from the factory OBD-II connector, but can be tapped from the vehicle harness. This is best done at the CAN gateway box or around the driver's foot well, just above the fuse panel. HarnessPetrel Data CAN Tap Harness Speed500 kbit/s TerminationDo not terminate WiringWhen working with vehicle wiring, it is crucial to verify all wire colors and pin locations using manufacturer-provided information. You are solely responsible for correctly modifying your vehicle's wiring if necessary. Petrel Data Systems assumes no responsibility for any modifications you make. While any wiring information provided has been verified to the best of our knowledge, you must independently confirm its accuracy. The CANH and CANL wires are bundled as a twisted pair.
|
||||||||||||||||
911 (991.1) GT3 2014–2016▾
Channels
Supported Devices
ConnectionThe CAN network is unavailable from the factory OBD-II connector, but can be tapped from the vehicle harness. This is best done at the CAN gateway box or around the driver's foot well, just above the fuse panel. HarnessPetrel Data CAN Tap Harness Speed500 kbit/s TerminationDo not terminate WiringWhen working with vehicle wiring, it is crucial to verify all wire colors and pin locations using manufacturer-provided information. You are solely responsible for correctly modifying your vehicle's wiring if necessary. Petrel Data Systems assumes no responsibility for any modifications you make. While any wiring information provided has been verified to the best of our knowledge, you must independently confirm its accuracy. The CANH and CANL wires are bundled as a twisted pair.
|
||||||||||||||||
911 (991.1) GT3 Cup▾
Channels
Supported Devices
ConnectionThe CAN network is available from the 8-pin DT connector to the right side of the center console, and power is available from the nearby 4 pin DT radio connector. Both CAN and power are also available from the the 4-pin DTM connector to the AliveDrive DVR, if present. HarnessA custom harness is required. Speed500 kbit/s TerminationDo not terminate WiringWhen working with vehicle wiring, it is crucial to verify all wire colors and pin locations using manufacturer-provided information. You are solely responsible for correctly modifying your vehicle's wiring if necessary. Petrel Data Systems assumes no responsibility for any modifications you make. While any wiring information provided has been verified to the best of our knowledge, you must independently confirm its accuracy. The CANH and CANL wires are bundled as a twisted pair.
|
||||||||||||||||
911 (991.2) 2015–2019▾
Channels
Supported Devices
ConnectionThe PT CAN network is unavailable from the factory OBD-II connector, but can be tapped from the vehicle harness. This is best done at the CAN gateway box or around the driver's foot well, just above the fuse panel. HarnessPetrel Data CAN Tap Harness Speed500 kbit/s TerminationDo not terminate WiringWhen working with vehicle wiring, it is crucial to verify all wire colors and pin locations using manufacturer-provided information. You are solely responsible for correctly modifying your vehicle's wiring if necessary. Petrel Data Systems assumes no responsibility for any modifications you make. While any wiring information provided has been verified to the best of our knowledge, you must independently confirm its accuracy. The CANH and CANL wires are bundled as a twisted pair.
|
||||||||||||||||
911 (991.2) GT3 2017–2019▾
Channels
Supported Devices
ConnectionThe PT CAN network is unavailable from the factory OBD-II connector, but can be tapped from the vehicle harness. This is best done at the CAN gateway box or around the driver's foot well, just above the fuse panel. HarnessPetrel Data CAN Tap Harness Speed500 kbit/s TerminationDo not terminate WiringWhen working with vehicle wiring, it is crucial to verify all wire colors and pin locations using manufacturer-provided information. You are solely responsible for correctly modifying your vehicle's wiring if necessary. Petrel Data Systems assumes no responsibility for any modifications you make. While any wiring information provided has been verified to the best of our knowledge, you must independently confirm its accuracy. The CANH and CANL wires are bundled as a twisted pair.
|
||||||||||||||||
911 (991.2) GT3 RS 2018–2019▾
Channels
Supported Devices
ConnectionThe PT CAN network is unavailable from the factory OBD-II connector, but can be tapped from the vehicle harness. This is best done at the CAN gateway box or around the driver's foot well, just above the fuse panel. HarnessPetrel Data CAN Tap Harness Speed500 kbit/s TerminationDo not terminate WiringWhen working with vehicle wiring, it is crucial to verify all wire colors and pin locations using manufacturer-provided information. You are solely responsible for correctly modifying your vehicle's wiring if necessary. Petrel Data Systems assumes no responsibility for any modifications you make. While any wiring information provided has been verified to the best of our knowledge, you must independently confirm its accuracy. The CANH and CANL wires are bundled as a twisted pair.
|
||||||||||||||||
911 (992) 2019+▾
Channels
Supported Devices
ConnectionThe PT CAN network is unavailable from the factory OBD-II connector, but can be tapped from the vehicle harness. The CAN wiring pair can be found behind the passenger side foot well fuse box cover. HarnessPetrel Data CAN Tap Harness Speed500 kbit/s TerminationDo not terminate WiringWhen working with vehicle wiring, it is crucial to verify all wire colors and pin locations using manufacturer-provided information. You are solely responsible for correctly modifying your vehicle's wiring if necessary. Petrel Data Systems assumes no responsibility for any modifications you make. While any wiring information provided has been verified to the best of our knowledge, you must independently confirm its accuracy. The CANH and CANL wires are bundled as a twisted pair.
|
||||||||||||||||
911 (996.2) 2002–2006▾
Channels
Supported Devices
ConnectionThe Drive CAN network is unavailable from the OBD port, but can be tapped from behind the instrument cluster at the connector labeled 'Green A Plug'. Power can be tapped from the same connector. HarnessPetrel Data CAN Tap Harness Speed500 kbit/s TerminationDo not terminate WiringWhen working with vehicle wiring, it is crucial to verify all wire colors and pin locations using manufacturer-provided information. You are solely responsible for correctly modifying your vehicle's wiring if necessary. Petrel Data Systems assumes no responsibility for any modifications you make. While any wiring information provided has been verified to the best of our knowledge, you must independently confirm its accuracy. The CANH and CANL wires are bundled as a twisted pair.
|
||||||||||||||||
911 (997)▾
Channels
Supported Devices
ConnectionThe Drive CAN network is unavailable from the OBD port, but can be tapped from the vehicle harness. This is best done around the driver's foot well, just above the fuse panel. Power and ground can be tapped nearby from around the factory OBD connector. HarnessPetrel Data CAN Tap Harness Speed500 kbit/s TerminationDo not terminate WiringWhen working with vehicle wiring, it is crucial to verify all wire colors and pin locations using manufacturer-provided information. You are solely responsible for correctly modifying your vehicle's wiring if necessary. Petrel Data Systems assumes no responsibility for any modifications you make. While any wiring information provided has been verified to the best of our knowledge, you must independently confirm its accuracy. The CANH and CANL wires are bundled as a twisted pair.
|
||||||||||||||||
911 (997) GT3▾
Channels
Supported Devices
ConnectionThe Drive CAN network is unavailable from the OBD port, but can be tapped from the vehicle harness. This is best done around the driver's foot well, just above the fuse panel. Power and ground can be tapped nearby from around the factory OBD connector. HarnessPetrel Data CAN Tap Harness Speed500 kbit/s TerminationDo not terminate WiringWhen working with vehicle wiring, it is crucial to verify all wire colors and pin locations using manufacturer-provided information. You are solely responsible for correctly modifying your vehicle's wiring if necessary. Petrel Data Systems assumes no responsibility for any modifications you make. While any wiring information provided has been verified to the best of our knowledge, you must independently confirm its accuracy. The CANH and CANL wires are bundled as a twisted pair.
|
||||||||||||||||
911 (997) GT3 RS▾
Channels
Supported Devices
ConnectionThe Drive CAN network is unavailable from the OBD port, but can be tapped from the vehicle harness. This is best done around the driver's foot well, just above the fuse panel. Power and ground can be tapped nearby from around the factory OBD connector. HarnessPetrel Data CAN Tap Harness Speed500 kbit/s TerminationDo not terminate WiringWhen working with vehicle wiring, it is crucial to verify all wire colors and pin locations using manufacturer-provided information. You are solely responsible for correctly modifying your vehicle's wiring if necessary. Petrel Data Systems assumes no responsibility for any modifications you make. While any wiring information provided has been verified to the best of our knowledge, you must independently confirm its accuracy. The CANH and CANL wires are bundled as a twisted pair.
|
||||||||||||||||
Boxster (981) 2012–2016▾
Channels
Supported Devices
ConnectionThe CAN network is unavailable from the factory OBD-II connector, but can be tapped from the vehicle harness. This is best done at the CAN gateway box or around the driver's foot well, just above the fuse panel. HarnessPetrel Data CAN Tap Harness Speed500 kbit/s TerminationDo not terminate WiringWhen working with vehicle wiring, it is crucial to verify all wire colors and pin locations using manufacturer-provided information. You are solely responsible for correctly modifying your vehicle's wiring if necessary. Petrel Data Systems assumes no responsibility for any modifications you make. While any wiring information provided has been verified to the best of our knowledge, you must independently confirm its accuracy. The CANH and CANL wires are bundled as a twisted pair.
|
||||||||||||||||
Boxster (981) Spyder 2015–2016▾
Channels
Supported Devices
ConnectionThe CAN network is unavailable from the factory OBD-II connector, but can be tapped from the vehicle harness. This is best done at the CAN gateway box or around the driver's foot well, just above the fuse panel. HarnessPetrel Data CAN Tap Harness Speed500 kbit/s TerminationDo not terminate WiringWhen working with vehicle wiring, it is crucial to verify all wire colors and pin locations using manufacturer-provided information. You are solely responsible for correctly modifying your vehicle's wiring if necessary. Petrel Data Systems assumes no responsibility for any modifications you make. While any wiring information provided has been verified to the best of our knowledge, you must independently confirm its accuracy. The CANH and CANL wires are bundled as a twisted pair.
|
||||||||||||||||
Boxster (987) 2005–2012▾
Channels
Supported Devices
ConnectionThe Drive CAN network is unavailable from the OBD port, but can be tapped from the vehicle harness. This is best done around the driver's foot well, just above the fuse panel. Power and ground can be tapped nearby from around the factory OBD connector. HarnessPetrel Data CAN Tap Harness Speed500 kbit/s TerminationDo not terminate WiringWhen working with vehicle wiring, it is crucial to verify all wire colors and pin locations using manufacturer-provided information. You are solely responsible for correctly modifying your vehicle's wiring if necessary. Petrel Data Systems assumes no responsibility for any modifications you make. While any wiring information provided has been verified to the best of our knowledge, you must independently confirm its accuracy. The CANH and CANL wires are bundled as a twisted pair.
|
||||||||||||||||
Cayman (981) 2012–2016▾
Channels
Supported Devices
ConnectionThe CAN network is unavailable from the factory OBD-II connector, but can be tapped from the vehicle harness. This is best done at the CAN gateway box or around the driver's foot well, just above the fuse panel. HarnessPetrel Data CAN Tap Harness Speed500 kbit/s TerminationDo not terminate WiringWhen working with vehicle wiring, it is crucial to verify all wire colors and pin locations using manufacturer-provided information. You are solely responsible for correctly modifying your vehicle's wiring if necessary. Petrel Data Systems assumes no responsibility for any modifications you make. While any wiring information provided has been verified to the best of our knowledge, you must independently confirm its accuracy. The CANH and CANL wires are bundled as a twisted pair.
|
||||||||||||||||
Cayman (981) GT4 2015-2016▾
Channels
Supported Devices
ConnectionThe CAN network is unavailable from the factory OBD-II connector, but can be tapped from the vehicle harness. This is best done at the CAN gateway box or around the driver's foot well, just above the fuse panel. HarnessPetrel Data CAN Tap Harness Speed500 kbit/s TerminationDo not terminate WiringWhen working with vehicle wiring, it is crucial to verify all wire colors and pin locations using manufacturer-provided information. You are solely responsible for correctly modifying your vehicle's wiring if necessary. Petrel Data Systems assumes no responsibility for any modifications you make. While any wiring information provided has been verified to the best of our knowledge, you must independently confirm its accuracy. The CANH and CANL wires are bundled as a twisted pair.
|
||||||||||||||||
Cayman (987) 2005–2012▾
Channels
Supported Devices
ConnectionThe Drive CAN network is unavailable from the OBD port, but can be tapped from the vehicle harness. This is best done around the driver's foot well, just above the fuse panel. Power and ground can be tapped nearby from around the factory OBD connector. HarnessPetrel Data CAN Tap Harness Speed500 kbit/s TerminationDo not terminate WiringWhen working with vehicle wiring, it is crucial to verify all wire colors and pin locations using manufacturer-provided information. You are solely responsible for correctly modifying your vehicle's wiring if necessary. Petrel Data Systems assumes no responsibility for any modifications you make. While any wiring information provided has been verified to the best of our knowledge, you must independently confirm its accuracy. The CANH and CANL wires are bundled as a twisted pair.
|
Scion
FRS (ZN6) 2012–2016▾
Channels
Supported Devices
ConnectionThe CAN network is available via the factory OBD-II connector, using the standard pins of CAN High on pin 6 and CAN Low on pin 14. |
Subaru
BRZ (ZC6) 2012–2021▾
Channels
Supported Devices
ConnectionThe CAN network is available via the factory OBD-II connector, using the standard pins of CAN High on pin 6 and CAN Low on pin 14. |
BRZ (ZD8) 2022+▾
Channels
Important NoteThe oil pressure channel is only active if an Ansix Auto oil pressure sensor or a GJP Gen2 oil pressure sensor CAN bus kit is installed. Supported Devices
ConnectionThe CAN network is available via the connector for the Active Sound Control System that runs behind the passenger glove box. This line can be teed using an Ansix Auto CAN Adapter for this chassis, which adds an additional OBD port that provides CAN High on pin 6 and CAN Low on pin 14. HarnessAnsix Auto CAN Adapter Speed500 kbit/s TerminationDo not terminate |
Toyota
86 (ZN6) 2012–2021▾
Channels
Supported Devices
ConnectionThe CAN network is available via the factory OBD-II connector, using the standard pins of CAN High on pin 6 and CAN Low on pin 14. |
||||||||||||||||
GR Yaris (XP210) 2020+▾
Channels
Supported Devices
ConnectionThe high-speed CAN network is unavailable from the factory OBD-II connector, but can be tapped from the vehicle harness. The CAN wiring pair can be found at the CAN gateway in the passenger side foot well. The correct CAN pair is labelled CAN8 and runs to an empty option connector. HarnessPetrel Data CAN Tap Harness Speed500 kbit/s TerminationDo not terminate WiringWhen working with vehicle wiring, it is crucial to verify all wire colors and pin locations using manufacturer-provided information. You are solely responsible for correctly modifying your vehicle's wiring if necessary. Petrel Data Systems assumes no responsibility for any modifications you make. While any wiring information provided has been verified to the best of our knowledge, you must independently confirm its accuracy. The CANH and CANL wires are bundled as a twisted pair.
|
||||||||||||||||
GR86 (ZN8) 2022+▾
Channels
Important NoteThe oil pressure channel is only active if an Ansix Auto oil pressure sensor CAN bus kit is installed. Supported Devices
ConnectionThe CAN network is available via the connector for the Active Sound Control System that runs behind the passenger glove box. This line can be teed using an Ansix Auto CAN Adapter for this chassis, which adds an additional OBD port that provides CAN High on pin 6 and CAN Low on pin 14. HarnessAnsix Auto CAN Adapter Speed500 kbit/s TerminationDo not terminate |
||||||||||||||||
Supra (JN29/DB) 2019+▾
Channels
Supported Devices
ConnectionThe PT CAN network is unavailable from the factory OBD-II connector, but can be tapped from the vehicle harness. The CAN wiring pair can be found in a harnesses behind the passengers side foot well kick panel. HarnessPetrel Data CAN Tap Harness Speed500 kbit/s TerminationDo not terminate WiringWhen working with vehicle wiring, it is crucial to verify all wire colors and pin locations using manufacturer-provided information. You are solely responsible for correctly modifying your vehicle's wiring if necessary. Petrel Data Systems assumes no responsibility for any modifications you make. While any wiring information provided has been verified to the best of our knowledge, you must independently confirm its accuracy. The CANH and CANL wires are bundled as a twisted pair.
|
Volkswagen
Golf R (MK7.5) 2018▾
Channels
Important NoteThe MAP channel displays boost pressure calibrated at sea level. Supported Devices
ConnectionThe PT CAN network is unavailable from the OBD port, but can be tapped from the vehicle harness. This is best done from the large wiring bundle located behind the left side kick panel. Wiring pins match conenctor J533 on the data bus on board diagnostic interface. HarnessPetrel Data CAN Tap Harness Speed500 kbit/s TerminationDo not terminate WiringWhen working with vehicle wiring, it is crucial to verify all wire colors and pin locations using manufacturer-provided information. You are solely responsible for correctly modifying your vehicle's wiring if necessary. Petrel Data Systems assumes no responsibility for any modifications you make. While any wiring information provided has been verified to the best of our knowledge, you must independently confirm its accuracy. The CANH and CANL wires are bundled as a twisted pair.
|